HP PRIME Scientific Calculator
Take a HP-50G pouch and give it a new use. The Prime fits nicely in it.Time to tear down the machine to have a look inside.
Undo two screws to access the battery.
Undo four screws to remove the back cover.
Use a plastic pry tool to help release the lateral latches.
Undo ten small steel screws to release the keyboard PCB.
Undo four back steel screws to release the main Processor/Display PCA.
Rise the Keyboard PCB to access the keyboard membrane.
Remove the KB membrane to access the keyboard frame assembly..
To remove the Processor/Display assembly, use a plastic pry tool to lift the white display frame.
- SAMSUNG S3C2416XH-40 SoC 400MHz ARM9 based processor.
- SAMSUNG K9F2G08U0C-SCB0 2Gbit 3.3Volt SLC Flash ROM memory (8-bit words).
- hynix H5MS2562NFR-E3M 256Mbit 1.8Volt DDR400 RAM memory (16-bit words).
By the way, Samsung has announced the EOL status for the SoC processor in the link above.
What will be the future of the HP Prime?
A reimplantation?
NOVATEK NT11002 1306-AD Touch panel controller, partially hidden by the flat cable.
This IC can be found in many Android devices as well.
Lifting the display assembly (in white color), reveals the touch screen input device (gray color).
Extra details from the Processor PCB.
A Buzzer reference in the PCB.
And a UART serial I/O as well.
General parts view.
The Prime uses five key sets.
The three color LED lenses on the back cover.
The battery is a pretty standard component, available in most retail shops under the Samsung cell phones accessories section.
Specs: Lithium-Ion 3.7V 1500mAh (5.55Wh)
Battery model: 484461AR
Reassembling the machine by reverse order was quite easy and took about 15 minutes.
It booted normally as soon as the battery was inserted in the compartment.
Happy 2015 Christmas holidays for all!
I'm signing out and go to the high mountains in the North of my little country, where the chilly wind and negative temperatures during the night keeps you inside home drinking with the family and celebrating the season.
Sem comentários:
Enviar um comentário